Industrial

When you are monitoring your processes, you are in control. On-line or portable water and gases monitoring gives you the information you need to be efficient, productive and most importantly, safe.
Please browse our selection below, and if you would like any assistance in making your decision do not hesitate to get in touch at (416) 766-9171 or This email address is being protected from spambots. You need JavaScript enabled to view it..
In-Line Monitoring
Orbisphere Electrochemical O₂/O₃ Sensors (A1100/C1100)
- Designed for process monitoring as well as laboratory analysis
- Offers extremely accurate measurements which is necessary wherever oxygen or ozone measurement is critical
Orbisphere Luminescent Dissolved Oxygen Sensors (G1100/K1100)
- Utilizes a Luminescent Dissolved Oxygen (LDO) sensor to monitor process-dissolved oxygen at the part-per-billion level.
- Employs the use of a dry sensor with no membrane or electrolyte required for operation
Particle Detection
Pharmaceutical Microbial Detection for Air
- Continuous, immediate and real-time…
- Using proprietary optical technology, the IMD-A microbial detection system is capable of simultaneously detecting both size and intrinsic fluorescence of airborne particulates – screening for biologic particles as small as 0.5 microns. The system offers a ready means for determining the microbial content of an aerosol sample on a particle-by-particle basis, thereby providing a continuous, real-time analysis of environmental bioburden. This constant monitoring and effective trending deliver knowledge to act, actions that could prevent excursions from leading to the catastrophic loss of a batch. The IMD-A 300 system samples air at 1.15 litres per minute and the IMD-A 350 samples air at 28.3 litres per minute.
Pharmaceutical Microbial Detection for PW, UPW, WFI
- Continuous, immediate and real-time…
- Using proprietary optical technology, the IMD-W microbial detection system is capable of simultaneously detecting both size and intrinsic fluorescence of waterborne particulates – screening for biologic particles as small as 0.5 microns. The system offers a ready means for determining the microbial content of an online sample on a particle-by-particle basis, thereby providing a continuous, real-time analysis of water borne bioburden. This constant monitoring and effective trending deliver knowledge to act, actions that could prevent excursions from leading to the catastrophic product loss.
Plastics & Recycling
microPHAZIR Handheld NIR Analyzer
- Handheld Near-Infrared instrument designed for rapid on-site identification and analysis
- Truly portable analysis, powered by a lithium ion battery and weighing only 2.75 lbs
- Available in four variants; 'GP' for General Purpose analytics, 'AS' for identifying Asbestos, 'PC' which is ideal for Plastics and Recycling, and 'RX' for Pharmaceutical applications
Water Quality
Anatel A-1000 & A-1000XP Total Organic Carbon Analyzers
- Ideal for monitoring ultrapure water systems
- Comes equipped with serial, analog and digital interfacing capabilities
- Detection limits from 0.05ppb to 1999ppb
Anatel PAT700 Total Organic Carbon Analyzer
- Fully compliant real-time release TOC Analyzer
- Designed specifically for On-line release of USP, EP and JP Water
- Provides immediate On-line results for both TOC and conductivity
QbD 1200 TOC Analyzer
- The new TOC analyzer QbD1200 is designed for use in 21CFR part 11 lab environments and is fully compliant to meet all global pharmacopeia regulations for measuring TOC in water for injection (WFI) and purified water. This TOC analyzer delivers highest performance with unparalleled ease of operation and maintenance by dramatically simplifying the setup process, improving reliability of your results, and reducing overall cost of ownership. With the fastest calibration time in the industry, it also promises convenient validation as the paperless reporting allows all audit-able reports over secure FTP protocol to a central server.